HR1221W UPS EPS Telecom AGM Sealed Deep Cycle Battery 12V 5AH
1.The battery is full of power when it’s out of factory, no need to
2.no memory, no need to discharge battery use, suitable for circuit
3.by high partition, adsorption and strong.
4.there is no flowing liquid (poor liquid), does not leak acid and
5.comply with environmental requirements, ease of use.
6.the use of lead-calcium alloys, battery self-discharge is very
7.easy storage, less maintenance.
8.using ABS plastic shell and valve technology for safe use.
|Nominal Voltage||12V||Nominal Capacity (C20)||5.0Ah (10.5V, at 25℃)|
|Nominal Power(15min)||21W/Cell (10.02V, at 25℃)||Weight||Approx. 1.76kg|
|Width 70mm||Internal Resistance||Approx. 35 mΩ (25℃)|
|Height 101mm||Max Charging Current||1.5A (25℃)|
|Total Height 107mm||Max Short-duration Discharge Current||150A(25℃)|
|Charging Voltage||Standby Use||2.275±0.025V/cell (25℃)||Temperature Compensation||Standby Use||-3.3mV/℃/cell|
|Cyclic Use||2.45±0.05V/cell (25℃)||Cyclic Use||-5mV/℃/cell|
UPS & EPS system
Banks & Financial Centre
Hospital& Testing Laboratories
Emergency Power Systerm
Alarm & Security system
High Power Backup Supply
Extra Long Life: our batteries are designed with high quality grid alloy enables
the grid with features of anti-corrosion, low gas emission and
cycle performance, as well as high density and special deep cycle
prescription is adopted to ensure extra long cycle life.
High Reliability and Safety: High strength ABS battery container and lid, perfect
safety valve design, and high strength & excellent large
electroconductivity copper terminal design are adopted to ensure
with high reliability and safety at extreme condition.
High Environmental Adaptability: our batteries adopts special fumed silica Gel
in electrolyte and special Gel type separator to prevent
This can significantly improve the battery's service life and
Non-Cadmium Design, Environment-friendly: our batteries have adopted
internationally leading technology - container formation
production technology, which is in the leading position in the
industry. It helps to
save energy 28.5%, save water 90%, and non-discharge of waste
Batteries should be stored in dry and clean warehouse which has
Batteries should avoid direct sunlight. Batteries should not be
near to heat
(such as radiator, the distance should more than 1m).
Batteries should avoid any toxic gas and organic solvent.
Batteries should be recharged within the storage life or before